info@egrdecor.com.au(07) 3718 1100
Trade login ↗Contact
← All articles
Guides

Compliance, Certification and Warranties

EGR Decor panel compliance: E0 and TSCA Title VI MDF, Global GreenTag, ASTM D3363 pencil hardness, TruNatur antibacterial testing, ISO systems, warranties.

Retail fit-out in EGR Decor panels

Formaldehyde emissions: E0 and TSCA Title VI

EGR Decor MR MDF panels are produced on MR MDF rated to formaldehyde emissions standard E0 or TSCA Title VI.

Australian size tables list StyleLite MR MDF and particleboard, and TruNatur MDF and MR MDF, as E0.

Global GreenTag health declarations

TruNatur holds a Global GreenTag Platinum Health rating. The PlatinumHEALTH rating is recognised by WELL and LEED.

StyleLite TruGloss and TruMatte MDF panels hold a Global GreenTag Product Health Declaration. The current certificates for both are valid to 18 December 2026.

Pencil hardness (ASTM D3363)

EGR measures scratch resistance as pencil hardness to ASTM D3363. Graded pencils are pushed across the surface at 45° under a set downforce.

The rating is the hardest pencil that does not scratch or mark the surface. Results are for face materials bonded to MDF with PUR reactive hot-melt.

CollectionFinishFace materialPencil hardness
StyleLiteTruGlossAcrylic-capped ABS4H
StyleLiteTruMatteAcrylic-capped ABS5–6H
TruNaturMatteNano-coated polyolefin5–6H
StyleLexTexturedWeatherproof polymer5–6H
PETLite (US)Gloss and MatteHardcoated PET8H
VersiliteSuper MattePVC4H

Antibacterial surface: TruNatur

TruNatur's Smart Nano surface carries an antibacterial agent. It carries the SIAA mark, given to products evaluated under ISO 22196.

EGR's data sheets report over 99% reduction in E. coli and S. aureus growth within 24 hours, tested to ISO 22196 and JIS Z 2801.

Australian standards

StyleLite laminated board complies with AS/NZS 4386.1 for appearance, flatness, wood substrate and the adhesive bonding system.

StyleLite Waterproof and TruNatur panels meet the relevant sections of AS/NZS 4386.

Quality and environmental management

StyleLex, StyleLite Waterproof and TruNatur panels are made in Australia at EGR's ISO 9001-certified facilities.

StyleLite is made under EGR's Environmental Management System, independently accredited to ISO 14001.

Warranties in Australia and New Zealand

EGR's current warranty covers manufacturing defects in products purchased on or after 1 May 2026. It covers vertical, non-structural decorative use unless EGR documents say otherwise.

It excludes horizontal surfaces including benchtops, direct or prolonged sunlight, heat damage, and failure to follow cleaning and installation guidance.

ProductWarranty term
StyleLite7 years residential; 3 years commercial and caravan/RV
TruNatur7 years residential; 3 years commercial and caravan/RV
StyleLex7 years residential; 3 years commercial
EGR Edgeband1 year
EGR Essentials3 years
ZenoLite10 years
Lustrolite10 years

Questions people ask

How long is the StyleLite warranty?

For purchases in Australia and New Zealand from 1 May 2026, StyleLite is covered for 7 years in residential use. Commercial and caravan/RV use is covered for 3 years.

Does the warranty cover benchtops?

No. EGR's warranty excludes use as horizontal surfaces, including benchtops. Products are intended for vertical, non-structural decorative use.

How is TruNatur's antibacterial claim tested?

To ISO 22196 and JIS Z 2801. EGR reports over 99% reduction in E. coli and S. aureus bacterial growth within 24 hours.

Are carcass panels covered for outdoor sun exposure?

No. EGR's warranty says carcass panels are intended for internal use only and are not covered for UV exposure.

Read next · GuidesChoosing a Panel SubstrateMR MDF, particleboard, lightweight plywood, block board or waterproof composite core? What each EGR Decor substrate is for, plus the carcass options.